Low Carb Friends  
Netrition.com - Tools - Faces - Recipes - Home


Go Back   Low Carb Friends > Recipes and Menus > Low Carb Recipe Help & Suggestions
Register FAQ Search Today's Posts Mark Forums Read


Forum Jump
Reply
 
Thread Tools Display Modes
Old 04-20-2017, 12:22 PM   #1
sbwertz
Senior LCF Member
 
sbwertz's Avatar
 
Join Date: Jun 2004
Location: Phoenix, AZ
Posts: 611
Gallery: sbwertz
Stats: Low carb for blood sugar control
Cuisinart food processors

I have one of the very old Cuisinart food processors...the original DLC 7 that had the lid with the small oval feed tube, no expanding sleeve, and disks with permanently attached straight stems. I later bought the upgrade kit for it that included the new workbowl/lid with the large feed tube, the expanding sleeve and the bent removeable disk stems. I also have a bazillion disks for it.

I also have the juicer attachment and the pasta attachment for the processor. It was in daily use until two years ago, when I bought a small DLC10 for daily use to save wear and tear on the old unit to preserve it for things the small one cannot do. Then came the blade recall....and the blade for the new one was recalled, along with the original blade for the DLC 7. Thank goodness the blade that came with the upgrade kit was not riveted and was not recalled, but the old unit was back in daily use until I finally got the new blade for the new unit this week.

I also have the Cuisinart mini with the 2 cup bowl that I use for chopping nuts and other small jobs.

They just don't make things like this any more. That DLC 7 is more than 30 years old and has been in almost daily use all that time and still works perfectly.

A friend is wanting to buy a new food processor, and I am not sure to tell her what to buy. The new Cuisinart DLC 10 is really not the same quality as my old one. Is there another brand one of you could recommend?
__________________
Sharon Wertz
sbwertz is online now   Reply With Quote

Sponsored Links
Old 04-20-2017, 09:14 PM   #2
Bracelet
Senior LCF Member
 
Join Date: Nov 2014
Posts: 130
Gallery: Bracelet
When I want to know which one of a certain product is best, I look for online reviews. I don't look at the website of the company who manufactures the item because they will always claim their product is best. Places like Amazon, eBay, Walmart and other sites, have product reviews made by people who purchased the item. If there are a lot of reviews, I always read a couple that give the product a high rating and all or most of the reviews that give it a low rating. That way you will know all the faults of that item.
Bracelet is offline   Reply With Quote
Old 04-21-2017, 10:57 AM   #3
SkeeterN
Major LCF Poster!
 
SkeeterN's Avatar
 
Join Date: Jun 2004
Location: West Central Ohio
Posts: 1,838
Gallery: SkeeterN
Stats: 4'10 and 170/120 (menopause stinks)
WOE: Atkins
Start Date: April 2004
I have an old cuisinart too and used it so much something sharp started sticking out of the button to turn it on. I put tape over it. I never did have the disks for it just the S blade. It still works but I ended up buying a different food processor for the disks. Wow is this so light that they had to make suction cups on the bottom to keep it in one place when using.

I won't get rid of my cuisinart but it is stored away for now. I have had this one for years. We shall see how long this new one lasts. Probably no long
__________________
~~Anita~~
Celebrated Atkins for 13 years!
Read how low carb saved my life
Anita's Web Page
SkeeterN is offline   Reply With Quote
Old 04-26-2017, 03:17 PM   #4
Barbo
Very Gabby LCF Member!!!
 
Barbo's Avatar
 
Join Date: Jun 2007
Location: Southern Ca. San Juan Capistrano
Posts: 4,109
Gallery: Barbo
Stats: 225/145/136
WOE: Low Carb Diabetic Plan
Start Date: August 2005
I too had the old one and used it for over 30 years. Finally it had it and
we bought a new Cuisinart. I didn't like it at all. Not nearly the quality.
So we took it back. Would not tell anyone to purchase the new ones for 2017.
__________________
BARBOS LOWCARB kITCHEN
Barbo is online now   Reply With Quote
Old 04-27-2017, 04:15 AM   #5
SkeeterN
Major LCF Poster!
 
SkeeterN's Avatar
 
Join Date: Jun 2004
Location: West Central Ohio
Posts: 1,838
Gallery: SkeeterN
Stats: 4'10 and 170/120 (menopause stinks)
WOE: Atkins
Start Date: April 2004
Quote:
Originally Posted by Barbo View Post
I too had the old one and used it for over 30 years. Finally it had it and
we bought a new Cuisinart. I didn't like it at all. Not nearly the quality.
So we took it back. Would not tell anyone to purchase the new ones for 2017.
Glad I didn't spend the money then.
__________________
~~Anita~~
Celebrated Atkins for 13 years!
Read how low carb saved my life
Anita's Web Page
SkeeterN is offline   Reply With Quote
Old 04-27-2017, 04:55 AM   #6
cselzler
Senior LCF Member
 
Join Date: Jun 2010
Location: Tulsa Oklahoma
Posts: 96
Gallery: cselzler
WOE: moderate carbs
I have cuisine art wide shoot food processor and am disappointed for sure. Works fine for doughs and such, but for slicing shredding etc it is worthless as it is. Their safety measures mean you can't put anything in the shoot that is more than an inch or two tall. I might as well slice with a knife. I cut off the safety pin and permanently leave it in the hole. Which means the machine will run without the pusher in the shoot so care must be taken, however, I can have carrots or zucchini full length in the shoot and slice or shred. As far as what brand might be better, I'd check out how they set up being able to shred or slice without having to totally defeat the safety measure before getting anything.
cselzler is offline   Reply With Quote
Old 04-27-2017, 05:47 AM   #7
SkeeterN
Major LCF Poster!
 
SkeeterN's Avatar
 
Join Date: Jun 2004
Location: West Central Ohio
Posts: 1,838
Gallery: SkeeterN
Stats: 4'10 and 170/120 (menopause stinks)
WOE: Atkins
Start Date: April 2004


I got for Christmas a Hamilton Beach 14 cup food processor. It is so light it has to have suction cups on the bottom to keep it steady. So far it works great and I use it often. The slicer does a pretty decent job. It was $55 vs $200 for the Cuisinart. I kept my old cuisinart in case this one breaks
__________________
~~Anita~~
Celebrated Atkins for 13 years!
Read how low carb saved my life
Anita's Web Page
SkeeterN is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 07:23 PM.


Copyright ©1999-2017 Netrition, Inc. All rights reserved. - Terms of Service | Privacy Policy
LowCarbFriends® is a registered mark of Netrition, Inc.